Stainless steel polishing and drawing machines may experience some common malfunctions during long-term use, which can affect equipment performance and processing efficiency.

Here are several common problems and corresponding solutions:

Solution: Check the wear of the polishing wheel or sand belt and replace it if necessary; Adjust processing parameters such as pressure and feed rate; Ensure that the workpiece is securely fixed and avoid shaking.

2. Excessive noise during equipment operation

Solution: Check if the bearings are worn or loose, replace or tighten them in a timely manner; Check the tension of the drive belt and adjust or replace it if necessary.

3. Workpiece overheating or surface burns

Solution: Check if the coolant is supplied normally to ensure its flow rate and distribution are even; Adjust polishing speed and pressure to avoid excessive friction; Use suitable polishing materials.

4. Equipment shutdown or inability to start

Solution: Check the power connection and electrical circuit to eliminate poor contact; Check if the start switch and control system are damaged; Regularly clean the interior of the equipment to avoid line failures caused by dust accumulation.

By promptly identifying problems and taking corresponding measures, the service life of equipment can be effectively extended, ensuring the normal operation and processing quality of stainless steel polishing and drawing machines.